Volkswagen Golf Mk7 Owners Manual: Manual gearbox: selecting a gear

Fig. 134 Gear shift pattern of a 5-speed manual gearbox

Fig. 135 Gear shift pattern of a 6-speed manual gearbox

First read and observe the introductory information and safety warnings 

The positions of the individual driving gears are shown on the gearshift lever   or  .

• Fully depress and hold the clutch pedal.

• Move the gear lever to the required position  .

• Release the clutch to engage.

In some countries, the clutch pedal will have to be depressed fully in order to start the engine.

Selecting reverse gear

• Reverse gear should only be selected when the vehicle is stationary.

• Fully depress and hold the clutch pedal  .

• Move the gear lever to the neutral position and push down.

• Push the gear lever fully to the left and then to the front in the reverse gear position   or  .

• Release the clutch to engage.

Shifting down

You should always select the next immediate gear when shifting down a gear whilst the vehicle is in motion. The engine revs should not be too high when doing this  . Damage to the clutch and the gearbox can occur if one or more gears are skipped when shifting down a gear at high speeds or high engine revs, even if the clutch is not released in the process  .

Kickdown

In vehicles with a speed limiter   , the kickdown function allows the driver to intentionally exceed the stored regulated speed, e.g. when overtaking.

When the accelerator is fully depressed, the speed limiter regulator is temporarily switched off when the vehicle exceeds the stored speed.

Once the vehicle returns to a speed below the stored speed and the accelerator is no longer fully depressed, speed limiter regulation becomes active again.

WARNING

When the engine is running, the vehicle will start to move as soon as a gear is engaged and the clutch released. This also applies when the electronic park brake has been switched on.

• Never engage reverse gear while the vehicle is in motion.

WARNING

Shifting gears incorrectly to a lower gear can lead to a loss of control of the vehicle, which can cause accidents and serious injuries.

NOTICE

Serious damage to the clutch and gearbox can occur if the gear stick on the manual gearbox is shifted to too low a gear when travelling at high speeds or at high revs. This also applies if the clutch remains depressed and the gears do not engage.

NOTICE

Please note the following to help avoid damage and premature wear:

• Do not rest your hand on the gear lever when driving. The pressure from your hand is passed onto the selector forks in the gearbox.

• Ensure that the vehicle has come to a full stop before engaging reverse gear.

• Always fully depress the clutch pedal when changing gear.

• Do not hold the vehicle by riding the clutch on a hill with the engine running.

Questions & answers

Manual gearbox: selecting a gear — Volkswagen Golf Mk7

How do I select a gear on the Golf Mk7 manual gearbox?

Fully depress and hold the clutch pedal, move the gear lever to the desired position shown on the shift pattern, then release the clutch smoothly. The shift pattern is printed on the lever knob.

How do I select reverse on the Golf Mk7 manual gearbox?

On 5-speed boxes, push the lever to the left and forward. On 6-speed boxes, lift the collar on the lever (or push down, depending on the variant) and move it to the reverse position.

Does the Golf Mk7 have a 5-speed or 6-speed manual gearbox?

Both were offered. Lower-powered engines typically have a 5-speed box; higher-powered variants use a 6-speed. The shift pattern on the lever knob shows which one is fitted.

What should I avoid when changing gear on the Golf Mk7?

Never rest your hand on the gear lever while driving — the weight can cause premature wear on the selector mechanism. Also never use the clutch pedal as a footrest.