Using offset screwdriver -VAS 6416- and torque screwdriver -V.A.G 1624-, this page covers removing the Bosch voltage regulator on the Volkswagen Golf Mk7 alternator.
| Special tools and workshop equipment
required |
|
|
|
| Offset screwdriver for slotted-head screws -VAS 6416- |
|
|
|
| Torque screwdriver -V.A.G 1624- |
| – |
Remove alternator -C-
→ Chapter. |
|
|
|
| – |
Using offset screwdriver for slotted-head screws -VAS 6416-,
carefully lever off protective cap -1-
at fasteners -arrows-. |
|
|
|
| – |
Remove bolts -arrows- for
voltage regulator -C1-. |
| – |
Remove voltage regulator -C1- from alternator -C-. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
| Component |
Specified torque |
| Bolts for voltage regulator
-C1- |
2 Nm |
Questions & answers
Removing and installing voltage regulator, manufacturer: Bosch — Volkswagen Golf Mk7
How do I replace the Golf Mk7 Bosch voltage regulator?
Remove the alternator. Unbolt the regulator/brush holder from the rear of the alternator and swap. Check brush length before refitting.
General description
There are different versions of decoupler pulleys with
freewheel.
Before removing the decoupler pul ...
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
Removin ...
