VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

This assembly overview covers the hybrid Volkswagen Golf Mk7 brake system pressure accumulator -VX70- (LHD): a bracket to check for secure seating after installation, an 8 Nm bolt, and a rubber damper.

Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles

1 -  Brake system pressure accumulator -VX70-
Removing and installing → Chapter
2 -  Bracket
Check for secure seating after installing
3 -  Bolt
8 Nm
4 -  Electrical connector
5 -  Rubber damper
Do not press rubber dampers out of bracket when installing bracket.
6 -  Bracket
7 -  Hexagon nut
20 Nm
8 -  Brake line
To brake master cylinder
With thread M10 x 1
14 Nm
9 -  Bolt
8 Nm
10 -  Dust cap
Fit onto bleeder valve
11 -  Bleeder valve
Before screwing in, apply thin coat of assembly paste -G 052 150 A2- to thread.
8 Nm

    Questions & answers

    Assembly overview – Brake system pressure accumulator -VX70-, LHD vehicles — Volkswagen Golf Mk7

    What is the Golf Mk7 GTE brake pressure accumulator -VX70-?
    A component unique to the GTE hybrid that stores hydraulic pressure from regenerative braking. It must be pre-bled before standard bleeding.
    Assembly overview - brake servo/brake master cylinder, RHD vehicles
    Complete brake master cylinders and brake servos can be renewed independently of each other. 1 -  Mounting bracket with brake pedal Assembly ...

    Assembly overview – Brake system pressure accumulator -VX70-, RHD vehicles
    1 -  Brake system pressure accumulator -VX70- Removing and installing → Chapter 2 -  Brake line To ...

    Other materials: