| Remove rain and light sensor -G397-
→ Chapter. |
|
|
|
| – |
Carefully remove sensor foil -2-
or any sensor foil residues from rain and light sensor -G397--1-. |
Caution
| The surfaces of the sensor must be completely free
of remnants of foil. |
|
| – |
Clean sensor surfaces with cleaning solution D 009 401 04. |
|
|
|
| – |
Pull silicone paper -3- off
sensor foil -2-. |
| The transparent protective foil -1-
remains initially on sensor foil as an assembly aid. |
|
|
|
| – |
With the aid of transparent protective foil
-1-, position sensor foil
-2- on rain and light sensor -G397--3-. |
|
|
|
| – |
Press on rain and light sensor -G397--2-
without bubbles through protective foil
-1-. |
|
|
|
| – |
Peel transparent protective film -1-
off sensor foil -2-. |
| – |
Install rain and light sensor -G397-
→ Chapter. |
|
|
|
Questions & answers
Repairing rain and light sensor, Valeo — Volkswagen Golf Mk7
How do I repair the Golf Mk7 Valeo rain/light sensor?
Same gel-pad renewal principle as TRW but different pad dimensions and fitting procedure. Follow Valeo-specific instructions.
The housings for the rain and light sensors -G397- from
various manufacturers differ.
The sensor housing with lens unit is always supplied as a
...
