VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Assembly overview - brake pedal, RHD vehicles

Note: the same dry-pivot-pin rule applies on RHD models — a 20 Nm bolt secures the mounting bracket on RHD hybrid Volkswagen Golf Mk7 pedals.

The brake pedal travel must not be restricted by additional floor coverings.
  Note
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.

Assembly overview - brake pedal, RHD vehicles

1 -  Bolt
20 Nm
2 -  Mounting bracket
Removing and installing → Chapter
3 -  Nut
25 Nm
4 -  Securing clip
Renew
Insert into both holes in mounting bracket.
5 -  Nut
To secure brake servo
Qty. 2
25 Nm
6 -  Pivot pin
To remove, remove mounting bracket first
Removal: turn pivot pin clockwise until pivot pin tabs break off
Renew pivot pin
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.
Installation: Turn pivot pin anti-clockwise until tabs engage audibly on stop.
7 -  Bearing bush
Cannot be renewed individually; ensure correct installation position
8 -  Brake pedal
Separating brake pedal from brake servo → Chapter
Connecting brake pedal to brake servo → Chapter
Removing and installing → Chapter
9 -  Bearing shell
10 -  Mounting
For ball head of brake servo plunger rod.
11 -  Bearing bush
Cannot be renewed individually; ensure correct installation position
12 -  Cap

    Questions & answers

    Assembly overview - brake pedal, RHD vehicles — Volkswagen Golf Mk7

    What does the Golf Mk7 GTE RHD brake pedal assembly show?
    Mirror of LHD.
    Assembly overview - brake pedal, LHD vehicles
    The brake pedal travel must not be restricted by additional floor coverings.   Note Do not lubricate or grease the pivot pin. The pivot ...

    Separating brake pedal from brake servo
    Special tools and workshop equipment required     Release tool -T10159- –  ...

    Other materials: