 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
|
|
|
| – |
Pull housing cover -1- off
headlight. |
|
|
|
| – |
Pull grip together with bulb holder
-1- out of reflector -2- in
direction of arrow -A-. |
|
|
|
| – |
Pull front left turn signal bulb -M5--2-
out of bulb holder -1-. |
| Install in the reverse order of removal, observing the
following: |
Caution
| Risk of damage to the headlight. |
| Do not touch the glass part of the bulb with bare
fingers. Fingers leave traces of grease on the glass
bulb, which vaporise when the bulb is switched on and
cause the glass bulb to cloud over. |
| Wear, for example, clean fabric gloves when
inserting bulbs. |
| Make sure the housing cover is correctly seated when
installing. The ingress of water will lead to permanent
damage to the headlight. |
|
| – |
Check headlight setting and adjust headlight if necessary
→ Booklet36.1 |
|
|
|
Questions & answers
Removing and installing front turn signal bulb -M5-/-M7-, dual halogen headlights — Volkswagen Golf Mk7
How do I change the Golf Mk7 halogen indicator bulb?
Twist the bulb holder anti-clockwise from behind the headlight, pull out, swap the PY21W bulb and refit.
Special tools and workshop equipment
required
Torque wrench -V.A.G 1783-
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Adjusting headlight installation position
Removing and installing front turn signal bulb -M5-/-M7- (gas discharge
headlights)