| Special tools and workshop equipment
required |
| – |
Remove front left wheel housing liner
→ General body repairs, exterior; Rep. gr.66. |
|
|
|
| – |
Disconnect electrical connector -1-. |
| Wiring harness -2- remains
connected to washer fluid reservoir. |
| – |
Place drip tray under washer fluid reservoir. |
| – |
Release securing clips -3- and
-4- in direction of arrow
-A-. |
| – |
Pull water line off washer pump -5-. |
| – |
Pull washer pump -5- upwards
-arrow B- out of washer fluid
reservoir. |
| Install in the reverse order of removal, observing the
following: |
 Note
| The connections at the pump and hoses are colour-marked to
prevent incorrect connection of the washer fluid lines to the
windscreen and rear window washer pump -V59-. The hose fittings
must be connected to the correct colour-coded pump connections
during installation. |
| – |
Check sealing grommet for damage. |
|
|
|
Questions & answers
Removing and installing windscreen washer pump — Volkswagen Golf Mk7
How do I remove the Golf Mk7 windscreen washer pump?
Disconnect the connector and hose. Twist or pull the pump out of the reservoir grommet. Press the new pump in.
Special tools and workshop equipment
required
Drip tray
Note
Dependent on the equipment level, the windsc ...
Special tools and workshop equipment
required
Drip tray
Removing
–
Remove washer fl ...
Removing and installing windscreen washer fluid level sender,
»R«
Removing and installing washer pump, »R«