Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing electromechanical parking brake button -E538-/auto-hold button -E540-

Note: the parking brake button -E538- and auto-hold button -E540- combine as one component and cannot be separated — this page gives their shared removal procedure.

Note The electromechanical parking brake button -E538- and the auto-hold button -E540- are combined to form one component and cannot be separated. The removal and installation procedures are described for LHD vehicles. Removal and installation for RHD vehicles are similar. Removing –  Remove centre console insert → General body repairs, interior; Rep. gr.68.

–  Press fasteners in direction of arrow -A-. –  Remove electromechanical parking brake button -E538--1- up and out of centre console insert -2-. Installing Installation is carried out in the reverse sequence. –  Test functionality.

Questions & answers

Removing and installing electromechanical parking brake button -E538-/auto-hold button -E540- — Volkswagen Golf Mk7

How do I remove the Golf Mk7 EPB/Auto Hold button?

Unclip the combined button unit from the centre console, disconnect and remove.

Removing and installing rear window regulator switch in door -E52-/-E54-

  Note Removal and installation are described for the left side. Removal and installation on the right side are carried out in the same way (mirror image ...

Removing and installing the starter button -E378-

  Note The removal and installation procedures are described for LHD vehicles. Removal and installation for RHD vehicles are similar. ...

Other materials:

• Removing and installing rear interior light/reading light
• Removing and installing fuel tank flap release button -E319-
• Removing and installing glove compartment light switch -E26-
• Removing and installing rotary light switch -EX1-
• Overview of fitting locations – controls in roof trim