VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing valve, rubber valve

Using tyre valve tool -VAS 6459-, this page covers installing a new Volkswagen Golf Mk7 rubber valve — inflate to approximately 3–4 bar so the bead slips audibly over the rim.

Ensure that the wheel rim is clean.
   
–  Insert new tyre valve with -VAS 6459--1-.
–  Unscrew and remove valve insert.
–  Inflate tyre to approx. 3 to 4 bar. The bead of the tyre must slip audibly over the hump of the rim.
–  Screw in valve insert.
–  Check tyre pressure to make sure prescribed pressure has been reached.
–  Balance wheel.
 

Removing and installing valve, rubber valve

    Questions & answers

    Removing and installing valve, rubber valve — Volkswagen Golf Mk7

    How do I replace a Golf Mk7 rubber tyre valve?
    Remove the tyre from the rim. Pull the old valve out from inside, lubricate the new valve and pull it through from outside using a valve puller tool.
    Removing and installing valve, description of the valve
    1. Valve body 1 -  Valve body 2 -  Valve core 3 -  Valve cap ...

    Removing and installing valve, metal valve
    Special tools and workshop equipment required     Torque wrench -V.A.G 1410- Ca ...

    Other materials: