Volkswagen Golf Mk7 Owners Manual: Centre cover
Fig. 218 shows removing the centre cover by pulling and Fig. 219 by turning, on the Volkswagen Golf Mk7 — the correct method depends on your wheel design. This page explains how to tell which type you have before attempting removal.
Fig. 218 Removing the centre covers by pulling
Fig. 219 Removing the centre covers by turning
First read and observe the introductory information
and safety warningsThe centre cover can be removed by pulling or turning , depending on the design.
Vehicles with centre covers that can be removed by pulling
- To remove, take the wire hook from the vehicle toolkit and insert it into a hole in the cover .
- Remove the cover in the direction of the arrow.
- To replace: press the centre cover against the rim until you feel it engage.
Vehicles with centre covers that can be removed by turning
- To remove turn the centre covers clockwise or anticlockwise until they are released from the rim .
- Reach behind one of the bars and remove the centre cover.
- To replace, place the centre cover in the middle of the rim.
- Press the centre cover against the rim until you feel it engage.
Questions & answers
Centre cover — Volkswagen Golf Mk7
How do I remove the Golf Mk7 wheel centre cover?
Depending on the design: either pull it straight off with a flat tool behind the edge, or turn it anti-clockwise and pull. The manual shows both methods with diagrams.
How do I refit the Golf Mk7 centre cover after a wheel change?
Align the cover with the valve cutout (if applicable), press or turn it into place until it clicks. Check it is secure before driving.
