 Note
| Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way. |
| – |
Turn light switch to “0” position. |
Caution
| Danger of damage to component surfaces. |
| When using leverage tools, mask visible areas of the
component with commercially available adhesive tape. |
|
|
|
|
| – |
If needed, apply a narrow screwdriver at opening on side.
|
| – |
Press off cover -1- in
-direction of arrow-. |
|
|
|
| – |
Turn bulb holder -1- in
direction of arrow -A-. |
| – |
Pull bulb holder out of tail light in direction of arrow
-B-. |
| – |
Pull reversing light bulb out of bulb holder. |
| Install in the reverse order of removal, observing the
following: |
Caution
| Risk of damage to the bulb. |
| Do not touch the glass part of the bulb with bare
fingers. Fingers leave traces of grease on the glass
bulb, which vaporise when the bulb is switched on and
cause the glass bulb to cloud over. |
| Wear, for example, clean fabric gloves when
inserting bulbs. |
|
|
|
|
Questions & answers
Removing and installing reversing light bulb — Volkswagen Golf Mk7
How do I change the Golf Mk7 reversing light bulb?
Twist the holder from behind the tailgate cluster, pull and swap.
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
Note
Removal and installation are described for the left side.
Removal and installation on the right side are carried out in
the same way.
...
