VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing brake pedal

Note: the hybrid Volkswagen Golf Mk7 brake pedal cannot be removed on its own — the pedal cluster with mounting bracket must be removed first.

It is not possible to remove the brake pedal separately.
–  To be able to remove it, pedal cluster with mounting bracket must be removed first → Chapter.
  Note
Removing brake pedal with mounting bracket removed
   
–  Turn pivot pin clockwise in direction indicated by -arrow-.
-1- = 14 mm hex socket wrench
  Note
This action will break off the tabs -B-. Renew the pivot pin.
–  Remove securing clip from pivot pin.
–  Pull out pivot pin towards right.
–  Remove brake pedal from mounting bracket.
Installing
  Note
Renew pivot pin and securing clip.
  Note
Do not lubricate or grease the pivot pin. The pivot pin must remain dry.
–  Slide pivot pin from right to left through mounting bracket and brake pedal.
–  Fit securing clip to pivot pin when pivot pin has been inserted into both holes in mounting bracket.
 

Removing and installing brake pedal

–  Turn pivot pin anti-clockwise in direction indicated by -motion arrow- until tabs -A- engage audibly on stop in mounting bracket.
–  Install pedal cluster with mounting bracket → Chapter.
 

Removing and installing brake pedal

    Questions & answers

    Removing and installing brake pedal — Volkswagen Golf Mk7

    How do I remove the Golf Mk7 GTE brake pedal?
    Same as standard: remove bracket, separate pushrod, unbolt pedal pivot.
    Connecting brake pedal to brake servo
    –  Hold ball head of push rod in front of mounting and push brake pedal in direction of brake servo, so that the ball head clicks into place. ...

    Removing and installing mounting bracket, LHD vehicles
    Remove dash panel end cover on driver side → General body repairs, interior; Rep. gr.70. –  Remove footwell cover on driv ...

    Other materials: