| – |
Remove adaptive cruise control unit -J428-
→ Chapter. |
|
|
|
| – |
Detach fasteners -1- on both
sides in direction of arrow -A-. |
| – |
Remove trim for radar sensor -2-. |
|
|
|
| – |
Release locking mechanisms -1-
in direction of arrow -A-. |
| – |
Swing out automatic distance control unit -J428--3-
in direction of arrow -B-. |
| – |
Remove automatic distance control unit -J428--3-
from adapter frame -2-. |
| Install in the reverse order of removal, observing the
following: |
| – |
Calibrate adaptive cruise control
→ Chapter. |
|
|
|
Questions & answers
Removing automatic distance control unit from and installing on adapter frame, variant 2 — Volkswagen Golf Mk7
How do I mount the Golf Mk7 ACC unit on the adapter frame (variant 2)?
The adapter frame bridges the variant 2 unit to the lock carrier. Bolt the unit to the frame, then the frame to the lock carrier.
Special tools and workshop equipment
required
Calliper square -VAS 6335-
Removing
–
...
Conditions
–
The adaptive cruise control unit -J428- needs to be
calibrated if the following conditions apply:
...
Removing automatic distance control unit from and installing on retaining
plate, variant 2
Calibrating adaptive cruise control