| The windscreen wiper system is equipped with an APP function
(alternating park position). |
| With the APP function, the wiper is moved up slightly once
it has reached the lowest position. This occurs every second
time the wiper system is switched off. |
| To fit the motor crank on the wiper motor, it is necessary
for the motor to be in the lowest park position. To ensure this
position is reached, the APP function must be deactivated. |
 Note
| The APP function cannot be activated. |
| After 100 cycles of wiper movement, the APP function is
activated automatically. This applies to wiper motors on which
the APP function has been deactivated and also to new wiper
motors. |
| – |
Connect vehicle diagnostic tester
→ Chapter. |
| – |
Deactivate APP function of wiper motor → Vehicle
diagnostic tester. |
Note
| Following successful completion of APP function coding /
deactivation, the wiper motor is located in the lower park
position after the next wipe cycle. |
|
|
|
Questions & answers
Deactivating APP function of wiper motor — Volkswagen Golf Mk7
What is the Golf Mk7 wiper APP function?
Automatic Park Position — the motor drives the wipers to the correct park position when switched off. Deactivation may be needed during motor replacement to set the reference point.
Special tools and workshop equipment
required
Release lever -80-200-
...
Note
The rain and light sensor has a silicon layer (coupling pad)
which forms the contact surface to the windscreen.
The r ...
