 Note
| Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals. |
| To avoid damage or faulty operation, brush seam seals smooth
near attachments which must be attached. |
| Water drainage holes must remain clear. |
| All threaded studs and welded nuts with metric threads as
well as all other studs and contact surfaces for assembly must
be functional following the extent of the sealing work. |
| Sealant must never be applied to bare substrates. Substrates
must always be filled first. |
|
|
|
| Seam seals, rear underbody, vehicles with CNG (gas-powered vehicle) |
| Coarse seam seals require that the sealant be applied at least 20 mm
wide and 2 mm high. |
| Sealant in the marked areas must be brushed following application. |
Note
| When brushing the sealant seam, ensure that the sheet metal edges
which are to be protected are not exposed and that the metal is covered
with a sufficiently thick layer of PVC. |
Questions & answers
Seam seals, body of CNG-powered vehicles — Volkswagen Golf Mk7
How do Golf Mk7 CNG seam seals differ?
Additional or modified seals around the gas tank mounting area. Must match the original in appearance and thickness.
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid ...
Note
Seam seals made during repair work must be identical in
appearance and thickness to the original seam seals.
To avoid ...
