This assembly overview covers the flanging tool -VAS 6056- itself: the upper part (unbolt to change jaws), handle fastening, and securing bolt for the hybrid Volkswagen Golf Mk7 brake line repair kit.
| 1 - |
Flanging tool upper part |
| Unbolt to change flanging jaws |
| Must be unscrewed to access securing bolt for upper part. |
| For flanging tool upper part |
| 4 - |
Grub screws for flanging jaws |
| For centring and holding flanging jaws |
| Hexagon socket head bolt, 2 mm |
| Assembly instructions
→ Fig. |
| Flanging jaw assembly instructions: |
| VAS 6056/6 (dark) for black brake lines |
| VAS 6056/7 (light) for green brake lines |
 Note
| The arrow on the rounded side of the flanging jaws must
point to the edge of the housing, and the straight side of the
flanging jaws must be installed towards the spindle, or the
flange will not be formed correctly. |
|
|
|
Questions & answers
Assembly overview - flanging tool — Volkswagen Golf Mk7
What does the Golf Mk7 GTE flanging tool assembly show?
Same tool set for creating brake line flares as the standard Golf.
Repairing brake lines
The flanging tool for brake lines -VAS 6056- can be used to
flange brake lines with an outer pipe diameter of 5 mm without ...
Unbolt relevant brake line at brake caliper or wheel brake
cylinder; catch escaping brake fluid and dispose of this as per
regulations.
&nb ...
