Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing windscreen washer fluid level sender

Using a drip tray, this page covers removing the Volkswagen Golf Mk7 washer fluid level sender -G33- — depending on equipment, it can be renewed individually or with the whole reservoir.

Special tools and workshop equipment required Drip tray   Note Dependent on the equipment level, the windscreen washer fluid level sender -G33- may either be renewed individually or together with the washer fluid reservoir. Removing –  Remove front left wheel housing liner → General body repairs, exterior; Rep. gr.66. –  Place drip tray under washer fluid reservoir.

–  Disconnect electrical connector -2-. –  Pull windscreen washer fluid level sender -G33--1- out of washer fluid reservoir. –  If necessary, remove seal -3- from washer fluid reservoir. Installing Install in the reverse order of removal, observing the following: –  Ensure that seal is fitted correctly to opening in washer fluid reservoir. –  Coat seal with washer fluid so that windscreen washer fluid level sender -G33- can be inserted more easily.

Questions & answers

Removing and installing windscreen washer fluid level sender — Volkswagen Golf Mk7

How do I remove the Golf Mk7 washer fluid level sender?

Pull the sender out of the reservoir grommet. Disconnect the connector. Press the new sender in until it clicks.

Removing and installing bracket for washer fluid reservoir, »R«

Removing –  Remove washer fluid reservoir → Chapter.     –  ...

Removing and installing windscreen washer fluid level sender, »R«

Special tools and workshop equipment required Drip tray   Note Dependent on the equipment level, the windsc ...

Other materials:

• Assembly overview – windscreen washer system, with headlight washer system, »R«
• Removing and installing washer pump, »R«
• Removing and installing bracket for washer fluid reservoir, »R«
• Removing and installing windscreen washer fluid level sender, »R«
• Removing and installing washer fluid reservoir, »R«