Using puller -T10369- and torque wrench -V.A.G 1331-, this page covers removing the Volkswagen Golf Mk7 rear wiper arm — switch on the ignition and run the wiper to its end position first.
| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1331- |
| – |
Actuate “rear window wipe” function and allow wiper arm to
move to its end position. |
| – |
Remove ignition key, if inserted. |
|
|
|
| – |
Press together cap of rear window wiper
-1- in direction of arrow
-A-. |
| – |
Fold up cover cap in direction of arrow
-B- to unclip. |
| – |
Loosen hexagon nut (13 mm) without unscrewing it completely. |
|
|
|
| – |
Fit puller -T10369/5- to wiper arm -2-. |
| – |
Fit thrust piece -3- to wiper
shaft. |
| – |
Screw in bolt -1- until wiper
arm has been pulled off the wiper shaft. |
| – |
Unscrew nut -4- completely and
remove wiper arm. |
| Install in the reverse order of removal, observing the
following: |
| – |
Adjusting wiper arm
→ Chapter. |
|
|
|
Questions & answers
Removing and installing wiper arm — Volkswagen Golf Mk7
How do I remove the Golf Mk7 rear wiper arm?
Lift the cap, unbolt the nut, rock the arm to break it free and lift off.
Caution
Risk of damage to the wiper blade.
Joint-free wipers are very flexible. To lift the
...
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
–&nbs ...
