Using vibration control system -VAS 6230 A-, this page covers testing beyond stationary balancing — including the radial force of the Volkswagen Golf Mk7 wheel and tyre assembly.
| Using the vibration control system -VAS 6230 A- you can
perform more functions than just stationary balancing. |
| A special feature of this system is the testing of the
radial force of the wheel and tyre while rolling. |
| A roller presses against the wheel with a force of about 635
kg. This simulates the vertical tyre force against the road
surface during travel. |
| Radial and lateral run-out in the wheel and tyre and
differences in the stiffness of the tyre cause the vertical
force of the wheel to vary. |
| The -VAS 6230 A- detects and stores the position of the
maximum measured radial force in the tyre. Then the position of
the smallest distance between the wheel rim flange and the
centre of the rim is measured. |
|
|
 |
Questions & answers
Vibration control system — Volkswagen Golf Mk7
What is the Golf Mk7 vibration control system?
A systematic approach: road test → static balance → runout check → wheel/tyre matching → finish balance → re-test. Follow the decision tree.
Note
Before working with a finish balancer, the mechanic needs to
have been instructed by the manufacturer of the balancer.
...
Radial and lateral run-out occur when the wheel and tyre do
not run absolutely true.
For technical reasons, 100% true running is not possible.
...
