| – |
Release hose clip -1- and
detach air hose. |
|
|
|
| – |
Unscrew bolt -2- on left and
right. |
| – |
Unclip air duct at lock carrier and detach. |
Risk of hand injury caused by the radiator fan starting automatically.Do
not grasp into the radiator fan when disconnecting the connector. |
|
|
| – |
Unplug electrical connector -1-
for radiator fan (push retainer to the rear
-arrow A- and press down release
catch). |
| – |
Press locking tabs on left and right sides of radiator cowl
-arrow B- and at the same time lift
radiator cowl off radiator. |
| – |
To do this, turn radiator cowl on one side through approx.
45° upwards. |
 Note
| If there are minor dents in the fins, refer to
→ Chapter. |
| Installation is carried out in the reverse order; note the
following: |
| – |
Electrical connections and routing → Current
flow diagrams, Electrical fault finding and Fitting locations. |
| Specified torque of air duct
→ Chapter |
|
|
|
Questions & answers
Removing and installing radiator cowling — Volkswagen Golf Mk7
How do I remove the Golf Mk7 1.4 TSI radiator cowling?
Unclip from the radiator, disconnect the fan motor connector and lift the cowl with fan out as a unit.
Note
Radiator and water radiator for charge air cooling circuit
are removed together.
Removing
–
...
Risk of hand injury caused by the radiator fan
starting automatically.Do not grasp into the radiator fan when
disconnecting the connector.
Removing
...
