VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Assembly overview - standard wheel

This assembly overview covers the Volkswagen Golf Mk7 standard wheel: the wheel itself, wheel bolts (different versions available), tyre, and the valve/tyre pressure sensor — always renew the valve, using only correct types.

Assembly overview - standard wheel

1 -  Wheel
Fitting wheels → Chapter
2 -  Wheel bolts
Different versions → Chapter
3 -  Tyres
→ Chapter „Information on tyres“
4 -  Valve/tyre pressure sensor
Always renew valve
Use only correct valves as specified in → Electronic Parts Catalogue “ETKA”
→ Chapter „Tyre pressure sensor“
5 -  Rim
Observe fitting instructions → Chapter
→ Chapter „Information on wheel rims“
→ Chapter „Structure of wheel rim“
6 -  Adhesive balancing weights
Not more than 60 g permitted per wheel rim flange
Remove dirt and grease from wheel rim at bonding point
Pull off backing foil
Bond on balancing weights at surfaces provided for this purpose
7 -  Anti-theft wheel bolt
Observe the fitting instructions → Chapter
Handling → Fig.
8 -  Adapter for anti-theft wheel bolt
Fit onto wheel bolt → Fig.
9 -  Cap for anti-theft wheel bolts
10 -  Caps for wheel bolts
11 -  Wheel bolts
Specified torque: → Running gear, axles, steering; Rep. gr.44
  Note
Make sure the correct wheel bolts are fitted → Electronic Parts Catalogue “ETKA”
Observe fitting instructions → Chapter
12 -  Wheel hub cover
Removing and installing → Chapter

    Questions & answers

    Assembly overview - standard wheel — Volkswagen Golf Mk7

    What does the Golf Mk7 standard wheel assembly show?
    Rim, tyre, valve, wheel bolt positions and torque. The assembly shows the relationship between rim width, offset and tyre size.
    Overview of components
    ...

    Assembly overview - wheel, PAX
    1 -  Wheel Fitting wheels → Chapter 2 -  Wheel bolts Different versions → Chapter ...

    Other materials: