Volkswagen Golf Mk7 Owners Manual: Test after driving for 10 minutes
After sealing a Volkswagen Golf Mk7 tyre and driving 10 minutes, this page gives the critical check: reconnect the filler hose and read the pressure display. At 1.3 bar or below, the tyre cannot be sealed adequately and you must not drive on — a clear, actionable threshold rather than guesswork.
First read and observe the introductory information
and safety warnings
Reconnect the tyre filler hose and check the tyre pressure on the tyre pressure display ⑥.
1.3 bar (19 psi / 130 kPa) and lower:
- Do not drive on! The tyre cannot be sealed adequately with the breakdown set.
- Seek expert assistance .
1.4 bar (20 psi / 140 kPa) and higher:
- Set the tyre pressure back to the correct value.
- Resume your journey to the nearest qualified workshop. Do not exceed a maximum speed of 80 km/h (50 mph).
- Have the damaged tyre replaced at the workshop.
WARNING
- Do not carry on driving if the tyre pressure is 1.3 bar (19 psi / 130 kPa) or lower.
- Seek expert assistance.
Questions & answers
Test after driving for 10 minutes — Volkswagen Golf Mk7
What should I check 10 minutes after sealing a Golf Mk7 tyre?
Reconnect the compressor and check the pressure. If it is 1.3 bar or lower, the seal has failed — do not drive on. If it is above 1.3 bar, inflate to the correct value and continue to a workshop.
What if the Golf Mk7 tyre pressure is too low after the 10-minute test?
The sealant has not sealed the puncture adequately. Do not drive — call roadside assistance for a tow or professional repair.
How far can I drive on a Golf Mk7 tyre sealed with the breakdown set?
The manual stresses driving to the nearest qualified workshop as soon as possible — the sealant is a temporary fix, not a permanent repair.
