Volkswagen Golf Mk7 Service & Repair Manual: Cleaning off excess adhesive
Using adhesive remover -D 002 000.10-, this page covers cleaning excess bonding adhesive from a Volkswagen Golf Mk7 after window fitting — with a direct warning not to press a freshly installed window outwards from inside the vehicle.
| – | Use adhesive remover -D 002 000. 10- as cleaning agent. Observe the appropriate safety precautions when performing this work. |
WARNING
|
| – | First clean painted surface as well as possible using a dry cloth. Remove residue using adhesive remover -D 002 000. 10-. |
| – | Cleaning plastic trim: allow adhesive sealant to cure (approx. one hour) and then peel off. |
Questions & answers
Cleaning off excess adhesive — Volkswagen Golf Mk7
How do I remove excess adhesive after Golf Mk7 windscreen installation?
Use adhesive remover -D 002 000.10- and follow safety precautions. Do not press on the freshly bonded glass from inside until the adhesive has fully cured.
Can I press on the Golf Mk7 windscreen from inside to clean it?
Not until the adhesive has fully cured. Pressing on freshly bonded glass can break the seal and compromise the structural bond.
