 Note
| Removal and installation are described for the left vehicle
side. Follow same instructions for the right side as
appropriate. |
| Special tools and workshop equipment
required |
|
|
|
| |
|
Removal lever -80 - 200 |
| – |
Remove wheel housing trim
→ Chapter. |
| – |
Remove side trim panel
→ Chapter. |
| Continued for all vehicles |
| – |
Remove lock carrier trim
→ Chapter. |
| – |
Remove bolts -3- and
-5- |
| – |
Release rear shelf support -1- in area
of retaining clips from body mountings -arrows-
using removal lever -80 - 200-. |
| – |
If fitted, disconnect connectors and remove rear shelf support
-1-. |
Note
-
| |
Before installing, check all fasteners for damage and
renew if necessary. |
-
| |
Remove any retaining clips left in body mountings
using removal tool -T40280- and fit them in rear shelf
support for installation. |
-
| |
Following installation, ensure that the rear shelf
support is positioned in rear lid seal beading. |
| Installation is carried out in reverse order. |
| |
→ Chapter „Assembly overview - rear shelf support“ |
|
Questions & answers
Removing and installing rear shelf support — Volkswagen Golf Mk7
How do I remove the Golf Mk7 rear shelf support?
Left side described; right similar. Unclip and remove. Access to rear belt retractors and C-pillar components behind it.
Special tools and workshop equipment
required
Removal lever -80 - 200
...
Note
Removal and installation are described for the left
vehicle side. Follow same instructions for the right side as
appropriate.
...
