Using release lever -80-200-, this page covers removing interior aerial 1 -R138- — remove the centre console insert first, then lever the aerial off its bracket.
| Special tools and workshop equipment
required |
|
|
|
| – |
Remove centre console insert
→ General body repairs, interior; Rep. gr.68. |
|
|
|
| – |
Lever aerial -1- off bracket
-3- using removal lever -80 - 200-. |
| – |
Disconnect electrical connector -2-. |
| Installation is carried out in the reverse sequence. |
|
|
|
| Removing and installing driver side aerial
for entry and start system -R134- |
 Note
| The driver side aerial for entry and start system -R134- is
integrated in the exterior door handle and cannot be renewed
separately if defective. |
| – |
Removing and installing door handle
→ General body repairs, exterior; Rep. gr.57. |
|
| Removing and installing front passenger
side aerial for entry and start system -R135- |
Note
| The front passenger side aerial for entry and start system
-R135- is integrated in the exterior door handle and cannot be
renewed separately if defective. |
| – |
Removing and installing door handle
→ General body repairs, exterior; Rep. gr.57. |
|
Questions & answers
Removing and installing interior aerial 1 for entry and start authorisation -R138- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 interior keyless aerial -R138-?
Unclip from under the centre console or dash panel, disconnect and remove.
Note
When renewing the control unit, select
Renew function for the respective control unit in
Guided fault finding or
Guided functions mode
...
Special tools and workshop equipment
required
Release lever -80 - 200-
Removing
...
Removing and installing interface for entry and start authorisation system
-J965-
Removing and installing luggage compartment aerial for entry and start
system -R137-