Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing turn signal switch -E2-, Kostal

Note: the turn signal switch -E2-, cruise control switch -E45- and intermittent wiper switch -E22- combine to form combination switch -E595- and cannot be renewed separately in the Kostal design.

Note The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column combination switch -E595-. These switches cannot be separated. If one of the switches is defective, the steering column combination switch -E595- must be renewed as a complete unit. Removing –  Remove steering column electronics control unit -J527- → Chapter.

–  Unscrew bolt -2- on underside. –  Pull off steering column combination switch -E595--1-. Installing Installation is carried out in the reverse sequence.

Questions & answers

Removing and installing turn signal switch -E2-, Kostal — Volkswagen Golf Mk7

How do I remove the Golf Mk7 Kostal turn signal stalk?

Remove column trims, press the release tab and pull the stalk out of the module.

Removing and installing steering column electronics control unit -J527-, Valeo

  Note Airbag coil connector and return ring with slip ring -F138- is integrated in steering column electronics control unit -J527-. ...

Removing and installing turn signal switch -E2-, Valeo

  Note The turn signal switch -E2-, cruise control system switch -E45- and intermittent wiper switch -E22- are combined to form the steering column ...

Other materials:

• Removing and installing ignition/starter switch
• Removing and installing immobiliser reader coil -D2-, vehicles with keyless access locking and starting system
• Removing and installing steering column electronics control unit -J527-, Valeo
• Removing and installing steering column switch module, Valeo
• Removing and installing intermittent wiper switch -E22-