| Lines may become damaged by moving or hot components. |
| – |
Route lines in their original positions. |
| – |
Ensure that there is sufficient clearance to moving or hot
components. |
| Mark lines prior to removal to prevent them from being
interchanged and to ensure that they are fitted in their
original positions. If necessary, take a photo or make a sketch. |
|
|
|
Questions & answers
Routing and securing lines — Volkswagen Golf Mk7
What rules apply to Golf Mk7 fuel line routing?
Lines must be clipped at the original factory positions, must not contact hot surfaces, and must have clearance to moving parts. Renew damaged clips.
Before starting work on the fuel supply system, the
following steps must be performed:
Before starting work, the extraction hose of a switched- ...
