Volkswagen Golf Mk7 Service & Repair Manual: Assembly overview - starter, vehicles with dual clutch gearbox (DQ200–7F)
This assembly overview covers the DQ200 7-speed DSG Volkswagen Golf Mk7 starter — the same 80 Nm double stud and equipment-dependent 20 Nm earth cable nut as the manual variant.
| 1 - | Starter -B- |
| Removing and installing → Chapter |
| 2 - | Double stud |
| Specified torque: 80 Nm |
| 3 - | Earth cable |
| Depending on vehicle equipment |
| 4 - | Nut |
| Depending on vehicle equipment |
| Specified torque: 20 Nm |
| 5 - | Electrical connector |
| 6 - | Nut |
| Specified torque: 20 Nm |
| 7 - | Cap |
| 8 - | Terminal 30/B+ |
| 9 - | Bolt |
| Specified torque: 80 Nm |
Questions & answers
Assembly overview - starter, vehicles with dual clutch gearbox (DQ200–7F) — Volkswagen Golf Mk7
What does the Golf Mk7 DQ200 DSG starter assembly show?
Same starter principle but different mounting position on the DQ200 bell housing.
Assembly overview - starter (vehicles with manual gearbox)
1 -
Starter -B-
Removing and installing
→ Chapter
2 -
Double stud
Specified torque: 80 Nm
...
Assembly overview - starter, vehicles with dual clutch gearbox (DQ250-6F)
1 -
Starter -B-
Removing and installing
→ Chapter
2 -
Bolt
Specified torque: 40 Nm
...
Other materials:
- Removing and installing starter, vehicle with manual gearbox
- Assembly overview - starter (vehicles with manual gearbox)
- Assembly overview - starter, vehicles with dual clutch gearbox (DQ250-6F)
- Removing and installing starter, vehicles with double clutch gearbox (DQ250-6F)
- Removing and installing starter, vehicles with double clutch gearbox (DQ200–7F)