Note
| The removal and installation procedures are described for
LHD vehicles. Removal and installation for RHD vehicles are
similar. |
| – |
Turn light switch to “0” position. |
|
|
|
| – |
Press in rotary knob -1- of
rotary light switch -EX1- opposite direction of arrow
-A- and turn it opposite direction
of arrow -B-. |
| – |
Hold rotary knob -1- in this
position. |
| – |
Pull entire rotary light switch -EX1- out of dash panel in
direction of arrow -A-. |
|
|
|
| – |
Disconnect connectors -arrow A-
and remove rotary light switch -EX1--1-. |
| Install in the reverse order of removal, observing the
following: |
|
|
|
| – |
Hold rotary light switch -EX1- and press in rotary knob of
light switch -1- while
simultaneously turning it clockwise -2-. |
| – |
Hold rotary knob in this position and insert rotary light
switch -EX1- into dash panel -3-. |
| – |
Turn the rotary grip to position “0” in order to ensure that
the switch engages in the dash panel. |
|
|
|
Questions & answers
Removing and installing rotary light switch -EX1- — Volkswagen Golf Mk7
How do I remove the Golf Mk7 rotary light switch -EX1-?
Pull the knob off, unbolt the switch from behind the dash panel trim.
Note
The illustration shows fitting locations for LHD vehicles. Fitting
locations for RHD vehicles are similar.
1 -
Driver vanity mirror contact ...
Note
The removal and installation procedures are described for
LHD vehicles. Removal and installation for RHD vehicles are
similar.
...
Overview of fitting locations – controls in roof trim
Removing and installing headlight range control regulator -E102-