Using removal wedge -3409-, this page covers removing the incandescent bulb for front interior light -WX1- — Note: shared with the front passenger reading light -W13-.
| Special tools and workshop equipment
required |
|
|
|
| – |
Lever off lens of front interior light -W1- at points marked
with -arrows- using removal wedge
-3409-. |
|
|
|
| – |
Pull bulb -1- out of bulb
holder in direction of arrow -A-. |
| Install in the reverse order of removal, observing the
following: |
Caution
| Risk of damage to the bulb. |
| Do not touch the glass part of the bulb with bare
fingers. Fingers leave traces of grease on the glass
bulb, which vaporise when the bulb is switched on and
cause the glass bulb to cloud over. |
| Wear, for example, clean fabric gloves when
inserting bulbs. |
|
|
|
|
Questions & answers
Removing and installing bulb for front interior light -W1- with incandescent bulbs — Volkswagen Golf Mk7
How do I change the Golf Mk7 front interior light bulb?
Lever the housing out, pull the bulb and replace.
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Special tools and workshop equipment
required
Removal wedge -3409-
Note
...
Note
Removing and installing light for front interior light -W1- with LED
Removing and installing bulb for rear interior light -W43- with incandescent
bulbs