| Eliminating flat spots caused by storage or handling |
| Flat spots caused by storage or handling cannot be
eliminated from the tyre using workshop equipment. |
| Flat spots caused by storage or handling can be removed only
by running the tyres warm. |
| The method described below is not recommended in cold and
wintry weather. |
| Requirements and conditions: |
| – |
If necessary, check tyre pressure and correct. |
| – |
If possible, drive the vehicle onto a motorway. |
| – |
Traffic and road conditions permitting, drive a 20 to
30 kilometre stretch at a speed of 120 to 150 km/h. |
WARNING
| Do not endanger yourself or other road users during
this road test. |
| Observe the highway code and speed limitations in
force when performing the road test. |
|
| – |
Jack up the vehicle immediately after the trip. |
| – |
Unbolt wheels from vehicle. |
| – |
Balancing wheels on stationary wheel balancer
→ Chapter. |
|
Questions & answers
Eliminating flat spots caused by storage or handling — Volkswagen Golf Mk7
How do I eliminate storage flat spots on Golf Mk7 tyres?
Drive the car for 10–15 km at moderate speed. Tyre temperature rises and the flat spot usually disappears. If it persists after 50 km, the tyre must be replaced.
Using the vibration control system -VAS 6230 A- you can
perform more functions than just stationary balancing.
A special feature of this system is th ...
Vibration, vibration control system
Evaluating tyres