Using torque wrenches -V.A.G 1331-/-V.A.G 1332-, this page covers removing the starter on DQ200 DSG Volkswagen Golf Mk7 models — disconnect the battery earth cable first.
| Special tools and workshop equipment
required |
|
|
|
| Torque wrench -V.A.G 1331- |
|
|
|
| Torque wrench -V.A.G 1332- |
| – |
With ignition switched off, disconnect earth cable from
battery -A-
→ Chapter. |
| – |
Remove air filter housing
→ Rep. gr.23. |
| Continued for all vehicles |
|
|
|
| – |
If fitted, unscrew nut -1- from
upper securing bolt of starter -B-. |
| – |
If fitted, remove earth cable -2-. |
|
|
|
| – |
Disconnect electrical connector -4-. |
| – |
Unscrew nut -6- and remove
terminal 30/B+. |
| – |
Remove bolts -1- and
-2- from starter -B--3-. |
| – |
Remove starter -B--3- upwards. |
| Install in the reverse order of removal, observing the
following: |
| → Chapter „Assembly overview - starter“ |
| – |
Reconnect battery -A-
→ Chapter. |
|
|
|
Questions & answers
Removing and installing starter, vehicles with double clutch gearbox (DQ200–7F) — Volkswagen Golf Mk7
How do I remove the Golf Mk7 starter (DQ200 DSG)?
Same principle but access differs due to the DQ200 housing shape. The intake manifold or other components may need moving for clearance.
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
Special tools and workshop equipment
required
Torque wrench -V.A.G 1331-
...
Removing and installing starter, vehicle with manual gearbox
Removing and installing starter, vehicles with double clutch gearbox
(DQ250-6F)