VW Golf Mk7 manualsGolf Mk7 / manual

Volkswagen Golf Mk7 Service & Repair Manual: Removing and installing bracket for parking aid control unit -J446-/park assist steering control unit -J791-, LHD vehicles

Using a feeler gauge, this page covers removing the LHD bracket for parking aid control unit -J446- or park assist steering control unit -J791- — insert the gauge to release the fasteners.

Special tools and workshop equipment required
Feeler gauge
Removing
–  If fitted, remove parking aid control unit/park assist steering control unit → Chapter.
   
–  To release the fasteners, insert a feeler gauge (0.9 mm) -2- behind the opening -arrow-, as shown in illustration.
–  Remove bracket -1- downwards from bracket for onboard supply control unit -3-.
Installing
Installation is carried out in the reverse sequence.
 

Removing and installing bracket for parking aid control unit -J446-/park assist steering control unit -J791-, LHD vehicles

    Questions & answers

    Removing and installing bracket for parking aid control unit -J446-/park assist steering control unit -J791-, LHD vehicles — Volkswagen Golf Mk7

    How do I remove the Golf Mk7 -J446-/-J791- bracket (LHD)?
    Unbolt from the mounting behind the dash panel or in the boot, depending on the variant.
    Renewing bracket for onboard supply control unit -J519-, LHD vehicles
    Removing –  Remove bracket for onboard supply control unit -J519- → Chapter. –  Remove on ...

    Removing and installing engine sound generator control unit -J943-, vehicles with active sound, Golf GTD
    Removing –  Remove C-pillar trim → General body repairs, interior; Rep. gr.70.     ...

    Other materials: