| – |
→ Chapter „Safety precautions when working on high-voltage
system“ Comply with notes. |
| – |
Read self-diagnosis of auxiliary heater using vehicle
diagnostic tester. |
| – |
When parts of the fuel system are removed or renewed, ensure
that all components for fuel delivery to the
auxiliary/supplementary heater are properly installed. |
| – |
Mark coolant hoses before removing to avoid any confusion
when reconnecting. |
| Following repair work in the vicinity of the
auxiliary/supplementary heater fuel line, check the following
points: |
| that the fuel lines are routed flush with the vehicle
underbody and are protected against mechanical damage. |
| that the auxiliary heater fuel line is protected from
heating which might disturb operation. |
| that the fuel line does not come in contact with parts that
become hot. |
|
|
|
Questions & answers
General repair instructions — Volkswagen Golf Mk7
What general repair rules apply to the Golf Mk7 auxiliary heater?
Observe HV safety (e-Golf/GTE), read self-diagnosis fault memory before work, follow the specific removal procedures, and ensure correct fuel line bleeding afterwards.
There are different types of identification plates.
When the auxiliary heater is replaced, check the type plate
and the duplicate plate and replace a ...
