| – |
Remove radiator grille
→ General body repairs, exterior; Rep. gr.66. |
Caution
| Risk of damage to component. |
| Carefully pull off bumper. When doing this, ensure
that the bumper is not being deformed or torn. |
| In order to avoid scratches on the surfaces when
removing the headlight, mask off the surrounding areas. |
|
|
|
|
| – |
Unscrew bolts -3- from front
wheel housing liner. |
| – |
Unscrew bolts -1- if present. |
| – |
Release bumper -2- from wing
and pull it off in direction of arrow -A-. |
|
|
|
| – |
Press both locking lugs in direction of arrow
-A- while at the same time pressing
in sender -1- as far as stop. |
| – |
Disconnect electrical connector -2-. |
| Install in the reverse order of removal, observing the
following: |
 Note
| When inserting the sender in the sender retainer, make sure
that the isolation ring (black silicone ring) is seated
correctly on the sender head. |
| Both locking lugs of sender retainer must audibly engage
when installing the sender. |
|
|
|
Questions & answers
Removing and installing front parking aid senders — Volkswagen Golf Mk7
How do I remove Golf Mk7 front parking sensors?
Push the sensor inward from behind the bumper. Disconnect the connector and remove. Note the colour coding for position.
Removing
–
Remove C-pillar trim
→ General body repairs, interior; Rep. gr.70.
...
Removing
Outer rear senders:
Note
The outer rear parking aid senders can be removed and
installed without the n ...
Removing and installing rear parking aid warning buzzer -H15-
Removing and installing rear parking aid senders