| Check wheel suspension, wheel bearing assembly and steering
for excessive play and damage. |
| Tread depth difference of no more than 2 mm on one axle. |
| Tyres inflated to correct pressures. |
| Spare wheel and vehicle tools are stowed in correct
locations. |
| Windscreen washer fluid reservoir must be full. |
| When checking wheel alignment, ensure that sliding plates
and turn tables are not touching end stop. |
| Please note the following: |
| The test equipment must be properly adjusted and attached to
the vehicle; observe device manufacturer's operating
instructions. |
| If necessary, ask the manufacturer to show you how to use
the wheel alignment machine. |
| Wheel alignment platforms and wheel alignment computers can
lose their original calibration over a period of time. |
| Wheel alignment platforms and computers should be checked
and adjusted as necessary during inspection and maintenance at
least once per year! |
| – |
Handle these highly sensitive devices carefully and
conscientiously. |
|
|
|
Questions & answers
Test prerequisites — Volkswagen Golf Mk7
What are the Golf Mk7 alignment test prerequisites?
Correct tyre pressures, no worn suspension components, vehicle at curb weight, steering wheel centred and locked, and the alignment system calibrated.
Wheel alignment must be performed only using a VW/AUDI-approved
wheel alignment unit!
Whenever wheels are aligned, both the front and rear axles
...
Special tools and workshop equipment required
Wheel alignment computer -V.A.G 1813F- or VW/Audi-approved wheel
alignment units
Brake pedal depressor ...
